CIRCUTOR PROTECTION AND CONTROL

TRP series

TRM series

Test and Verification Equipment for CT

TL-6e series

Microprocessor controlled digital instrument, developed to perform earth resistance and resistivity measurements (using the Wenner method).

CR series

The CR-50, CR-100 and CR-250 units are made up of current sources designed for checking the current / time tripping curve of the circuit-breakers and indirect protection relays.

MH series

Equipment designed to measure with high precision very low contact resistances of circuit breakers, keys, bus bars, transformer windings and motors.

MHe Series

The MH-100e digital microohmmeter is a portable, microprocessor-controlled instrument designed to measure with high precision very low contact resistances of circuit breakers, etc.

MI_MD series

The MD and MI portable megohmmeters have been designed to measure insulation resistances down to values on the order of TΩ, using a user-selectable test voltage.

TL-5 Series

The TL-5 tellurhmmeter is a microprocessor-controlled digital instrument, developed to perform earth resistance and resistivity measurements (using the Wenner method).

GETEST series

The MPC-5/50 GETEST allows to measure the voltages that appear between points on the ground (step voltage) or between ground and conductive parts (contact voltage) when there are leakage currents through the ground.

OT2-60D series

The OT2-60D is an automatic device designed for checking the breakdown voltage of insulating oils of transformers, cables with oil, circuit-breakers, capacitors, etc.

OT-60D series

By simply pressing the command corresponding to the chosen Standard, the microprocessor is in charge of programming the test according to the conditions of said Standard.

Differential protection

Industrial

IDA-EV series

RGU-100B Series

CBS-400B Series

WGB series

RGU10 Series

RGU2 Series

RG1M Series

RGE CBS4 Series

WRU10 Series

WRN series

WGBU series

RGMD Series

WGC Series

WGC-TB Series

RGU-10B Series

IDB-4 Series

WGB-35-TB Series

WGS-WGSP Series

TT series

WG series

WGP series

Circuit Breaker with Reconnection

RECB series

REC4 series

WGC-TB Series

WGC Series

CBS4-RA Series

REC3 / REC3C series

RGU-RAL series

WRU-RAL series

MCB series

WRU10K Series

WRKRT Series

CBS4-RAL Series

RECmaxCVM Series

RECmaxMP series

RECmaxLPD Series

RGU-MT Series

WRGU-MTT Series

WRU-10-MT Series

MT-FDE Series

RECmaxP series

MT Series - RRM Series

Relays and Control Elements

IMD-2R Series

Ohmic isolation relay, used to protect and monitor the isolation (kΩ, MΩ) between the receiver phase (s) and the protection cable reference.

TB3 series

It is in charge of supervising, controlling and transmitting possible anomalies in the different beacon components of the telephone transmission towers.

WI series

They are electronic devices with an output relay that connects or disconnects according to the current level detected in the circuit.

CDR8 Series

Equipment that measures, calculates and displays the current of 8 independent channels. Each channel is configurable as a differential relay or as a current relay.

RV series

Electronic relay for the protection and control of permanent voltages in single-phase and three-phase installations with neutral. Overvoltage protection, it trips for voltages higher than 265 V.

TB series

It is in charge of supervising, controlling and indicating possible anomalies in the different beacon components of the telephone transmission towers.