top of page

REACTIVE COMPENSATION CIRCUTOR

We are pioneers of the CIRCUTOR brand in Colombia

Reactive Energy Regulators

Automatic Regulators - Maneuver

computer-one (1).jpg
Computer One Series

Small boxless reactive power relay, ideal for compensating the cos ϕ in installations that require actuation in a single stage. It can also be used as a complement to a regulator with more steps, either as an alarm relay or to connect an additional step.

computer-two.jpg
Computer Two Series

Regulator of small dimensions without box, ideal to compensate the cos ϕ in installations that require a simple regulation and of low power, since it only has two output relays. It also has LEDs for signaling alarms and visualization of the connected relay

computer-max-plug-and-play.jpg
ComputerMAX Plug & Play Series

The series of high-tech MAX regulators are designed for simple and effective regulation. Like the entire range of computer regulators, it is based on CIRCUTOR's FCP system (Fast Computerized Program), which gives the regulator unique features on the market.

computer-smart-iii.jpg
Computer SMART III series

The computer SMART III reactive energy regulator is the only one on the market that adds to the traditional measurement with a single current transformer, the possibility of measuring with 3, also incorporating the functions of a complete network analyzer, and the control of residual leakage currents.

dir2.jpg
DIR2

It is capable of acting on a circuit depending on the inductive or capacitive reactive current that circulates through it. The DIR2 relay measures reactive current in mA from the secondary of a current transformer ... / 250 mA type MC1 or MC3. 

serie-computer-max.jpg
Computer MAX Series

They are designed for simple and effective regulation. The entire range of computer controllers is based on CIRCUTOR's FCP system (Fast Computerized Program)

computer-smart.jpg
Computer SMART series

It is capable of performing advanced functions such as: monitoring the status of the capacitors, differential protection of the installation, prevention of capacitor failure due to harmonic overload, etc.

Rapid Regulators

Static batteries

computer-max-f.jpg
Computer Max F Series

The MAX-f series of regulators is within the range of fast regulators with a response time of 40 ms indicated for real-time compensation needs.

computer-smart-iii-f.jpg
Computer SMART III-Fast Series

The computer SMART III Fast reactive energy regulator is the only one on the market that adds to the traditional measurement with a single current transformer, the possibility of measuring with 3, incorporating, the functions of a network analyzer.

computer-smart-f.jpg
Computer SMART F series

Power factor regulator with state-of-the-art technology, which offers in a single device the functions of regulator, electrical network analyzer and protection device.

Low Voltage Capacitors

Primaticos (Rectangular Box)

serie-cq.jpg
CQ Series

Dry type capacitors, with a range that covers power and voltage ranges, both at 50 and 60 Hz. Their manufacturing and testing process makes prismatic capacitors have a great longevity.

serie-cfb.jpg
CFB Series

Its application focuses on compensation in installations both in fixed loads and in load variations (capacitor banks), and with high harmonic content and / or existence of risk of resonance.

serie-cv.jpg
CV series

Its 4 levels of internal protection (self-healing internal fuse, overpressure cap and vermiculite), make prismatic capacitors the safest on the market.

serie-csb.jpg
CSB series

Its application focuses on compensation in installations both in fixed loads and in load variations (capacitor banks).

Cylindrical Tubular Capacitors

serie-clz-fpt-hd.jpg
CLZ-FPT-HD Series

Specially designed for installation in environments with the most demanding working conditions due to its longer useful life and resistance to high temperatures.

serie-clz-fp.jpg
CLZ-FP-M Series

CLZ tubular capacitors are dry type tubular sheath capacitors that cover a wide range of powers and voltages at both 50 and 60 Hz.

serie-clz-fp-hd.jpg
CLZ-FP-HD Series

Its application focuses on compensation in installations both in fixed loads and in load variations (capacitor banks).

RZ / RBZ series

serie-rz-rbz.jpg
RZ / RBZ series

CIRCUTOR has a standard range of rejection reactances p = 7%, with a resonance frequency of 189 Hz for 50 Hz networks (or on request 227 Hz for 60 Hz networks). This is the most frequent tuning value to avoid any resonance at the 5th harmonic and higher.

Medium Voltage Capacitors

serie-chv-m.jpg
CHV-M Series

Depending on the power and voltage required, we will vary the number of capacitors in parallel and / or series. Its stainless steel case makes the CHV condenser versatile for both indoor and outdoor use.

serie-rmv.jpg
RMV Series

Shock reactances limit the transient currents that occur in the connection of capacitors. CIRCUTOR RMVs are encapsulated in epoxy resin, which guarantees the required level of insulation.

serie-chv-t.jpg
CHV-T Series

CHV-T capacitors are used for the formation of batteries, both fixed and automatic up to 12 kV. Its stainless steel case makes the CHV-T versatile, for both indoor and outdoor use

serie-lvc.jpg
LVC series

The LVC contactor is a vacuum contactor, prepared to control inductive and capacitive loads.

Capacitor Bank

serie-optim-emk.jpg
OPTIM-EMK Series

The OPTIM-EMK series capacitor banks are equipment designed for reactive energy compensation in networks where load levels are fluctuating.

serie-fr.jpg
FR series

Batteries with rejection filters Series FR are equipment for the compensation of reactive energy in networks with fluctuating load levels, high harmonic content and there is a risk of resonance.

serie-optim-fr.jpg
OPTIM FR Series

Its application is basically focused on the compensation of installations with different loads which require a regulated compensation due to the variation of reactive energy and where the content of harmonics in the network is high.

serie-frf-frm.jpg
FRF-FRM Series

Its application is basically focused on compensation for transformers, motors. In general for the compensation of installations with constant loads and where the content of harmonics in the network is high

serie-fre(2).jpg
FRE series

The usual application is in individual loads or installations where a quick compensation response is necessary (eg welding equipment, elevators, etc). and where the content of harmonics in the network is high

serie-optim-fre.jpg
OPTIM FRE Series

The batteries with rejection filters OPTIM FRE are equipment for the compensation of reactive energy in networks where the load levels are fluctuating and the harmonic content is high and there is a risk of resonance.

Harmonic Filters

serie-afqm.jpg
AFQm series

Active filters with multilevel AFQm technology for wall installation, constitute the most complete solution to solve the quality problems caused, in three-phase industrial, commercial or service installations.

serie-afq-evo.jpg
AFQ-evo series

Ideal solution for installations with a large number of single-phase and three-phase loads that are generators of harmonics, such as computers, UPS's, lighting fixtures, lifting devices, air conditioners with inverter, etc.

serie-afq.jpg
AFQ Series

The most complete solution to solve quality problems caused, both in industrial, commercial or service facilities, not only by harmonics

serie-fb3.jpg
FB3 series

The FB3 filters are 3rd harmonic blocking filters, designed to reduce this harmonic in installations with distorting single-phase loads.

serie-lcl.jpg
LCL series

Designed to eliminate harmonics from the current absorbed by 6-pulse power converters, such as frequency inverters for motors, UPS, etc.

serie-lcl-th.jpg
LCL-TH Series

The LCL-TH filter is an LCL filter regulated through a static operation (thyristors), specially designed for harmonic compensation of 6-pulse power converters

Generador estático de reactiva

R__2_-removebg-preview.png
SVG

El Generador estático de reactiva SVG es un equipo electrónico para la compensación de potencia reactiva tanto
capacitiva como inductiva, su principio de funcionamiento es igual al del alto activo, el SVG inyecta corriente de forma opuesta para contrarrestar la potencia no útil
(Inductiva y capacitiva) de la instalación, permitiendo así, obtener el coseno objetivo.

Nuestro equipo puede ayudarle a identificar la solución adecuada

Logo Blanco - PNG.png

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

PHONES

+57 (1) 268 5200

+57 315 458 9575

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

ADDRESS

CALLE 95 # 9A-08

Bogota, DC - Colombia

  • Linkedin
  • WhatsApp

PHONES

+57 (1) 268 5200

+57 315 458 9575

bottom of page